Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
4 tire Rotation
Nittaya X. gave our service a 5 star review on 10/11/2024
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
Jeff K. gave our service a 5 star review on 8/7/2024
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
RF, RR, AND LR sensors not detected. Replace RF, RR, LR tpms sensors
Kim K. gave our service a 5 star review on 6/27/2024
Front or Rear,Both Sides;Includes: Disable Brake Control.;Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable).Includes: Repack Wheel Bearings (where applicable).DOES NOT include refinishing.; Two; Three; Four; Two Eco; Three Touring; Four Touring
John S. gave our service a 5 star review on 4/26/2024
Verified all modes work and temperature changes from hot to cold when engine is not running. Scanned for HVAC codes. No current codes. History code B1441 air mix damper control servomotor circuit (passenger side). Following diagnostic flow chart, used scan tool to monitor values of air mix servo D. Normal condition Max Cold 257 Max Hot 173. Scan tool displayed Max Cold at 153 and Max Hot at 54 and is not in spec. Needs No. 1 air conditoning radiator damper servo sub-assembly (air mix) replaced. Used bore scope to inspect temperature blend door actuator and gears are meshed like they should be.
HVAC DOOR ACTUATOR – Remove & Replace – One – [Includes: R&I Instrument Panel.] – [DOES NOT include Air Conditioning System recover, evacuate and/or recharge.]
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
Clarence V. gave our service a 5 star review on 4/18/2024
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
Tim D. gave our service a 5 star review on 10/30/2023
USB was operating properly and did not cut out. Port is a little loose but connection seems good. If wanting to replace USB port it will have to be taken to a dealer
Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection.
Craig D. gave our service a 5 star review on 9/21/2023